Axiom CNC AR8 Spoilboard | Vcarve & Vector files
If you have an Axiom AR8 CNC Machine then this file will work perfectly for you. If you don’t no worries, you can download this file and modify it to the size you need! This is to replace the stock spoil-board in case you ruin it for some reason… like I did :D
* Please note, these are not the full length, the stock spoil board is oversized and will not cut on the full machine. Feel free to break apart the design to do it on multiple sheets if you feel it’s needed. To clamp, I would clamp the outside and let the holes get drilled, after that, add screws to the holes and remove the outside clamps.
If you have an Axiom AR8 CNC Machine then this file will work perfectly for you. If you don’t no worries, you can download this file and modify it to the size you need! This is to replace the stock spoil-board in case you ruin it for some reason… like I did :D
* Please note, these are not the full length, the stock spoil board is oversized and will not cut on the full machine. Feel free to break apart the design to do it on multiple sheets if you feel it’s needed. To clamp, I would clamp the outside and let the holes get drilled, after that, add screws to the holes and remove the outside clamps.
If you have an Axiom AR8 CNC Machine then this file will work perfectly for you. If you don’t no worries, you can download this file and modify it to the size you need! This is to replace the stock spoil-board in case you ruin it for some reason… like I did :D
* Please note, these are not the full length, the stock spoil board is oversized and will not cut on the full machine. Feel free to break apart the design to do it on multiple sheets if you feel it’s needed. To clamp, I would clamp the outside and let the holes get drilled, after that, add screws to the holes and remove the outside clamps.
